Air filters are required to make use of equipment such as a blower or a furnace. Properly cleaning the filters will help improve the efficiency, prevent clogging, and even extend the lifespan of your equipment.
In the average home, your heating and cooling system can account for 90% or more of the total energy used. So making sure to install quality filters and maintain them properly will help you avoid spending a lot of money and breathing in hazardous air-borne materials.
What Is An HVAC System?
An air filter for your home HVAC system is an important part of your system. Not only does an air filter improve the quality of the indoor air, it can also protect your home from unwanted dust and debris. When you have an HVAC system with a proper filter, you can breathe easier knowing that you’re taking care of your health and protecting your investment. There are a variety of types of filters available, so make sure to choose the one that’s right for your needs.
The Importance Of Air Filters
Air filters play an important role in your home’s HVAC system. By removing particles and allergens from the air, filters can help to improve your health and reduce allergies. 20x23x1 air filters are used in HVAC systems to remove dust, pollen, and other airborne particles from the air. Air filters also improve the overall efficiency of your HVAC system by keeping dirt and dust out of the compressor and mum
What Types Of Air Filters Are Available?
There are a variety of types of air filters that are available for use in home HVAC systems. The most common type of air filter is the pleated paper filter. This type of air filter is usually found on household HVAC systems and it is designed to trap small particles and dirt that could be circulating in the air. Another type of air filter that is commonly used in residential HVAC systems is the activated carbon filter. This type of filter uses charcoal to absorb chemical and organic pollutants from the air.
How To Install A New Air Filter
Air filters are important for home HVAC systems. They help to reduce the amount of dust, pollen, and other airborne particles that can cause severe health problems. Air filters should be replaced regularly, typically every six months or when the filter begins to show signs of wear. Here are instructions on how to install a new air filter in your home HVAC system:
- Open the door to the furnace or A/C unit and remove the existing filter. It’s usually held in by screws on the sides or top of the unit. If there are no screws, use a screwdriver to pry off the edges until it comes loose.
- Remove the old filter material by snatching it away with your hand or a vacuum cleaner attachment. Discard it in an appropriate receptacle.
- Wash your hands thoroughly before touching any parts of the new filter assembly, especially if you have any debris on your hands from removing the old filter material.
- Fit the new filter assembly into place by lining it up squarely against the opening in the furnace or A/C unit and pressing down evenly until it clicks into place. Replace any screws that were removed earlier if they were used to hold on the old filter material.
- Push any stray pieces of filter material into corners and around tight spots where they may have become trapped during removal and installation, then vacuum them away cleanly with your vacuum cleaner attachment or disposable hand vacuums